ENC28J60 – 10Base-T Ethernet Controller with SPI Interface
- USD: $ 5.88
ENC28J60-I/SP – Ethernet Controller, 10 Mbps, IEEE 802.3, 3.1 V, 3.6 V, DIP, 28 Pins.
Note: Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE
- TECHNICAL DETAILS & TUTORIAL
- Additional information
- Reviews (0)
The ENC28J60-I/SP is a 10BASE-T stand-alone Ethernet Controller with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface.
It is designed to serve as an Ethernet network interface for any controller equipped with SPI. The ENC28J60 meets all of the IEEE 802.3 specifications. It incorporates a number of packet filtering schemes to limit incoming packets. It also provides an internal DMA module for fast data throughput and hardware assisted checksum calculation, which is used in various network protocols.
Communication with the host controller is implemented via an interrupt pin and the SPI, with clock rates of up to 20MHz. Two dedicated pins are used for LED link and network activity indication.
Target applications include VoIP, Industrial Automation, Building Automation, Home Control, Security and Instrumentation. Ethernet Application Design Center
- Description: 10Based-T Ethernet Controller
- Ethernet Bandwidth: 10Mbps
- MAC: Yes
- PHY: Yes
- TX/RX RAM Buffer(Bytes): 8K
- Interrupt Pin: 1
- LEDs: 2
- # Ethernet Ports: Ethernet x1
- Temp. Range Min. (°C): -40
- Temp. Range Max. (°C): 85
- Max Speed (MHz): 25Mhz
- Interface: SPI
- Vdd I/O (V): 3.3